{"id":101749,"date":"2026-07-09T11:20:11","date_gmt":"2026-07-09T03:20:11","guid":{"rendered":"https:\/\/www.motomaxsfr.com\/?p=101749"},"modified":"2026-08-04T11:49:57","modified_gmt":"2026-08-04T03:49:57","slug":"how-do-i-clean-my-motorcycle-chain-fast-easy-steps","status":"publish","type":"post","link":"https:\/\/www.motomaxsfr.com\/fr\/how-do-i-clean-my-motorcycle-chain-fast-easy-steps\/","title":{"rendered":"How Do I Clean My Motorcycle Chain? Fast & Easy Steps"},"content":{"rendered":"
\n
\n

Want to quickly and safely to clean the motorcycle chain, in fact, is not complicated. All you need to do is use the frame to lift the rear wheel overhead, directly spray some cleaning agent (such as kerosene) that does not damage the O-ring on the chain, then brush off the dirt with a three-sided chain brush, wipe it thoroughly with car paper or towel, and finally apply new chain oil to the inside of the roller. Many people are afraid of damaging expensive accessories and will search tutorials online. As a result, they often find 1 piles of extremely complicated maintenance manuals or contradictory suggestions in forums. The more they look at them, the more confused they become. In the past few years, I have been doing in-depth washing of track motorcycles, and I have figured out a set of “silly” ten-minute methods. This method will not only never hurt the internal sealing ring, can prevent dangerous oil from being thrown onto the rear tire, but also ensures that you can ride on the road immediately after washing.<\/p>\n\n\n\n

10 Minute C.S.L. Cleaning Rules: Fast and Easy Chain Cleaning<\/h2>\n\n\n\n

In ten minutes, plus a little methodical steps, you can safely rip off the road dirt from those worn parts of the drivetrain. The C.S.L. rules I ‘ve summarized-that is, Clear, Scrub and Lubricate-are designed for novices. Even if you don’t have professional garage equipment, you can maintain your car impeccably.<\/p>\n\n\n\n

\"An<\/figure>\n\n\n\n

Clean Up (Cardboard Dafa)<\/h3>\n\n\n\n

The most critical part of the preparation is not to let those slippery chemical spray splash on the rear tire. First, support the car with the rear frame so that the rear wheels can rotate freely. Then find a piece of waste cardboard and stick it vertically between the lower half of the chain and the rear rim. This self-made baffle can perfectly catch all dripping dirty water and excess cleaning agent, otherwise if the tire tread is stained with oil, you will easily fall off the car next time you ride out.<\/p>\n\n\n\n

The Second Step: Brushing (Three Sides)<\/h3>\n\n\n\n

Brush the chain is exquisite, the direction must be right, so as to push the dirty things out, rather than into the internal rubber sealing ring. First, spray the cleaning agent that does not damage the O-ring on the small half of the chain. Then hold the chain by swiping the card on three sides and turn the rear wheel back by hand. The hard bristles of the brush will take away the top, bottom and sides of the chain. After brushing, find a clean microfiber cloth or the kind of thick car paper, hold the chain tightly, turn the wheel again, and wipe the black mud thoroughly.<\/p>\n\n\n\n