Bicycle and Motorcycle Chain Oils: Why They Should Never Be Mixed
The most fundamental difference lies in the structure; the core is that “the sealing ring”
Whether you are riding a bicycle or a motorcycle, transmission cannot be separated from the chain, so chain oil is naturally indispensable to lubricate and reduce resistance, prevent rust and wear. But if you think the oils used for these two wheels can be interchanged, you are completely wrong.
The most crucial difference lies in the chain structure. Today’s variable speed bicycle chains simply can’t find the elastic rubber seals found on motorcycle drive chains. Motorcycle chains (also known as oil seal chains) are often equipped with O-type, X-type or Z-type oil seals. The function of this thing is to lock the grease pre-added to the pins and sleeves at the factory, and at the same time keep the mud and water on the outside out. However, bicycle chains do not have this design, and the chain link spacing and roller size are different, so they have to adapt to frequent lateral chain shifting. Therefore, from the perspective of physical structure requirements alone, the oils they need are completely different.
The work environment is worlds apart
Let’s take another look at the work environment. The motorcycle chain can withstand the direct output of the engine in a simple and rough manner. Rapid acceleration and sudden braking are common, and the speed when running is extremely high. Not to mention that it is so close to tires and brake discs that it is still outside in the wind and sun, eating dust and blocking rain all year round. Therefore, motorcycle chain oil must have abnormal adhesion and anti-folding ability, and high-strength protection against extreme pressure is the top priority.
In contrast, bicycle chains face far too much mild load and speed. When oiling a bicycle chain, the core requirements are: the oil must be able to quickly penetrate into the tiny gaps in the chain links, and as much as possible, it must not stick to ash. The entire transmission system must be kept clean and refreshing, and the pedaling resistance must also be reduced. One is a heavy worker who works in the wind and rain “a coarse grain worker”, and the other requires smooth and silky speed changes “fine parts”. Naturally, the requirements for oil are very different.
Common forms of these two oils on the market
A visit to a car shop will reveal that most bicycle chain oils on the market are low-viscosity liquid oils in small drop bottles, either dry film-forming or wax-containing formulas. Many brands also specifically distinguish between “dry” and “wet”, allowing you to use them to deal with dry dust or rainy road conditions respectively.
Motorcycle chain oil is quite different. It is usually a large can of aerosol like self-painting spray, which forms a very sticky oil film after being sprayed out. Some even act like lubricating paste. From the very beginning of their design, they are designed to wrap the chain in all directions, penetrate into the gaps between the rollers and the chain plates, be waterproof and corrosion-resistant, and most importantly, ensure that the oil will not be thrown away during high-speed racing. Of course, nothing is absolute, this is just a general classification ——bicycle oil also has special cases that focus on high adhesion, and off-road motorcycle circles also have dry formulas specially developed to prevent sticking to mud.
Why can’t they be mixed?
Let’s first talk about what it would be like to use bicycle oil on a motorcycle. If the bottle of oil in your hand is only labeled “for bicycles” and does not specify that it is compatible with motorcycle oil seals, do not put it on the motorcycle. Solvents or additives in bicycle oil may cause the rubber seal of motorcycle chains to bubble, deform, or even harden, eventually losing its sealing effect completely. Besides, bicycle oil is too thin. As soon as the motorcycle goes on high speed or gets slightly wet in the rain, the little oil is dried up or washed away in minutes. Even some reinforced oils advertised as capable of withstanding the high torque of electric-assisted bicycles (E-bikes) still cannot reach the stringent requirements of motorcycle chains “anti-slip, oil seal compatible, ultra-high load”.
What about the other way around? Spraying motorcycle chain oil onto a delicate bicycle is equally disastrous. The invincible adhesion of motorcycle oil transforms directly into a crazy ash vacuum cleaner “vacuum cleaner” on a bicycle. After a short ride, your flywheel and chain will be covered in disgusting black mud, which not only makes you doubt your life when washing, but also seriously drags down the smooth feel of the speed change. Although the exact severity depends on the recipe of each family and cannot be killed with one stick, the risk of stepping on pits in the general direction is 100% present.
How to choose the most reliable one?
When picking up oil for a motorcycle, the first step is to find out whether your chain has an oil seal or not, and then stare at the packaging to see if there is a clear label “compatible with your oil seal type”. Next, let’s look at the usage scenarios: those who run on many paved roads should choose high-speed anti-slinging types; those who often go off the road to play in the mud should choose those that are not easy to stick to sand. Don’t confuse the two.
It’s easy to pick up oil for your bicycle. Listen honestly to the manufacturer’s suggestions and choose from dry, wet or chain wax. Don’t watch a motorcycle spray go off so hard that you do something “dimensionality reduction” to force an upgrade to the bike.
Indeed, there are also those Wanjin oils on the market that claim to be “all-you-can-eat” (available on bicycles, motorcycles, and even go-karts), but only if the manufacturer clearly states these applicable targets in black and white on the packaging instructions. Just looking at whether it is the same brand or the packaging looks like it is useless——The same brand often separates the dry/wet oil of bicycles and the road/off-road oil of motorcycles and sells them separately. When buying, be sure to read the labels carefully one bottle at a time.
Finally, I’d like to give you a few more words from my heart
First, keep an eye on the amount and pay attention to the dosage! No matter what kind of oil you spray, if you use too much, it will become an ash-absorbing artifact; if you spray too much on a motorcycle, it will be even more fatal. Once the oil hits the rear tire or brake disc, it is simply a joke. The only criterion for oiling is “lubrication in place, no more, no less”, and definitely not looking as wet as possible.
Second, don’t expect to be resurrected by changing the bottle “of the fairy oil”. If your motorcycle chain is already shrunken, rusted, stuck, stretched, or the rollers inside are broken, the first thing you should think about is whether to get a new one quickly. It’s all rotten like this. You can’t save the metal structure that has been physically damaged by changing the expensive oil and spraying it to death. Choosing the right oil, cleaning it on time, and maintaining it regularly are the fundamental principles for extending the life of the chain and ensuring stable operation.
Verwandte Empfehlungen
-
How Do I Clean My Motorcycle Chain? Fast & Easy Steps
164Wondering How Do I Clean My Motorcycle Chain? Use Fast C.S.L. Steps To Safely Remove Grime And Avoid Costly Damage.
Details anzeigen -
How Do I Adjust My Front Fork Suspension? A Basic Guide
27Learn How To Adjust Fork Suspension, Including Preload, Sag, Compression, And Rebound For Safer, Better Setup.
Details anzeigen -
Motorradkette mit WD-40 und Kerosin reinigen: Ist das für O-Ringe unbedenklich?
299Reinigen Sie Ihre O-Ring-Kette sicher mit WD-40 und Kerosin. Sehen Sie sich unseren 72-Stunden-Gummitest an und vermeiden Sie die „Hot-Clean“-Falle.
Details anzeigen -
Kettenwachs vs. Schmiermittel: Schluss mit dem übermäßigen Schmieren Ihrer Motorradkette
353Kettenwachs vs. Schmiermittel: Kann man eine Motorradkette zu stark schmieren? Ja. Beherrschen Sie die 15-Minuten-Regel und verhindern Sie unschöne Schmierflecken am Rad.
Details anzeigen
Motomaxsfr