Fixed Caliper

Explore the TAISKO four-piston, one-piece opposed caliper from Motomaxsfr. Review the design and fitment requirements, then send your motorcycle specifications and quantity for a quote.

How a Fixed Caliper Works

A fixed caliper has a body that stays in position over the brake rotor. Hydraulic pressure moves opposed pistons on both sides of the rotor, pushing the brake pads against its two faces. Friction between the pads and rotor slows the wheel.

“Fixed” describes how the caliper body is mounted. The pistons and pads still move when the brake is applied. TVS Motor disc brake guide.

Fixed vs. Floating Calipers

The main difference is how each design brings both pads into contact with the rotor.

MerkmalFester BremssattelSchwimmsattel
Body movement during brakingBody stays in positionBody slides laterally on guides
Piston arrangementPistons on both sides of the rotorPistons on one side of the rotor
Pad applicationOpposed pistons push both pads toward the rotorPistons push one pad; movement of the body brings the opposite pad into contact

Replacing a floating caliper with a fixed design requires checking the mounting geometry, rotor alignment, available clearance, and hydraulic system together.

Available Fixed Caliper

Silver, orange, blue, and black TAISKO calipers shown in the 4 Pot Caliper product image

4 Pot Caliper product image from the TAISKO caliper series.

4-Topf-Messschieber

The TAISKO 4 Pot Caliper uses a one-piece body with four opposed pistons. The listed piston specification is φ30.2 × 4: four pistons, each 30.2 mm in diameter. Use the specifications below as the starting point for a fitment inquiry.

  • MarkeTAISKO
  • Produktname4-Topf-Messschieber
  • Product description4 Topf Einteiliger gegenüberliegender Bremssattel
  • Body constructionOne piece
  • Piston arrangementOpposed
  • Piston count4
  • Durchmesser des Kolbens30.2 mm each, approximately 1.19 in

Check Fitment Before Ordering

Match the caliper to the motorcycle's mounting points and rotor position. Mounting-hole spacing alone does not establish fitment: the offset must place the rotor correctly within the caliper, and the body must clear the wheel and surrounding components.

SieheInformation to provide
Motorcycle and brake positionMake, model, year, and front or rear location
Mounting geometryMount type, hole spacing, bolt size, and mounting offset
Rotor and padsRotor outside diameter and thickness, plus the required pad shape
ClearanceWheel and spoke clearance, with photos or dimensioned drawings of the installation area
Hydraulic connectionMaster cylinder bore, number of calipers operated, hose fitting, and ABS configuration where applicable

The master cylinder must match the caliper's fluid displacement requirements. Its bore affects the relationship between brake pressure and lever or pedal travel, so changing the caliper requires reviewing the hydraulic combination. Wilwood's engineering guide identifies caliper piston displacement as an input to master cylinder selection.

Have a qualified motorcycle brake technician verify the installation, including fasteners, hose routing, bleeding, leaks, and free wheel rotation. Follow the vehicle and component instructions for torque settings and brake checks before riding.

Specify Your Order

Include your required quantity and destination with the fitment information. For replacement orders, add the original part number or clear photos of the existing caliper. For project or stocking orders, identify the motorcycle applications you plan to cover.

State whether you need a caliper-only quote or want pads, mounting hardware, or other items quoted as well. List any required finish, packaging, and delivery date so the quotation can address the requested configuration and supply scope.

Request a Quote

Request a Quote

Send your requirements to Motomaxsfr for the 4 Pot Caliper. Start with your motorcycle or project, quantity, and destination; include fitment dimensions if available.

Required fields: Name, Work email, and Requirement.