sprocket in motorcycle

Motomaxsfr supplies front and rear sprockets for chain-driven motorcycles, with model-specific tooth counts and matching chain sizes. The front sprocket drives the chain from the transmission output shaft; the rear sprocket turns the wheel.

Explore the listed QJMOTOR and Benelli applications, then compare the model, chain size and gearing before requesting a quote.

What the sprockets do

The smaller front sprocket is mounted at the transmission output. As it rotates, its teeth engage the drive chain, which turns the larger sprocket attached to the rear wheel. Both sprockets must match the chain and the motorcycle's mounting dimensions for the drive to work as intended.

Match the motorcycle before choosing a tooth count

Start with the exact motorcycle model and variant. Then check the specified chain size, front and rear tooth counts, mounting pattern and available clearance. The products below include both 520 and 525 chain applications; a shared tooth count alone does not make two sprockets interchangeable. If you are replacing a worn chain drive, inspect the chain and both sprockets as a set.

Motorcycle sprockets by model

Image note: Each product card uses the same general illustrative image. It is not a model-specific product photo. Use the stated model, chain size and tooth counts to compare options, and confirm fitment before ordering.

How tooth counts change the final-drive ratio

Divide the rear tooth count by the front tooth count to calculate the final-drive ratio. Within the SRK600RR/BN600/Leoncino 500/Benell600 listing, 46T ÷ 14T gives about 3.29, while 49T ÷ 14T gives 3.50. The 49T option turns the rear wheel fewer times per front-sprocket revolution and favors stronger wheel torque at a given engine torque; the 46T option gives taller gearing at the same engine speed. Actual acceleration and top speed also depend on the motorcycle and operating conditions.

Information to send with a sprocket inquiry

Include the motorcycle's make, model, year and variant, the chain size, the existing front and rear tooth counts, and whether you want the same gearing or a specific change. A photo or drawing of the current sprocket and mounting area can help confirm the fit where model variants differ. For the products above, ask Motomaxsfr to confirm the available configuration and quote for the exact motorcycle.

Request a Quote

Tell us your motorcycle model, year, chain size and sprocket tooth counts. We will confirm the configuration before quoting.

  • Phone: +86-0571-88620207
  • Courriel : motomax@sfrchain.com
  • WhatsApp : +86-18857878411
  • Address: No. 271, Shuyun Road, Cangqian Street, Yuhang District, Hangzhou City, Zhejiang Province, People's Republic of China

Please verify model-specific fitment before ordering.