Motorcycle Sprockets — product overview

Motorcycle Sprockets

Welcome to your premier one-stop sourcing destination for professional-grade Motorcycle Sprockets. By combining cutting-edge manufacturing technology with decades of extensive company experience, we deliver precision sprockets specifically engineered to withstand the most extreme mechanical demands and environmental challenges. This dedicated hub provides absolutely everything you need to make an informed and confident B2B purchasing decision in a single location. Here, you will find highly detailed product displays, authentic global exhibition records, transparent glimpses into our factory production lines, complete quality and safety certifications, and highly insightful industry articles. We are deeply committed to streamlining your global supply chain through totally transparent manufacturing processes, comprehensive FAQ guidance, and highly responsive customer support. Scroll down to seamlessly browse our proven product categories, thoroughly evaluate our technical manufacturing credentials, and complete the quick contact form to securely finalize your wholesale order requirements.

CERTIFICATIONS

ISO9001ISO 9001
IATF16949IATF 16949
ISO14001ISO 14001
ISO45001ISO 45001
Request A Quote
Application / Sport And Off-Road MotorcyclesSprockets for chain-drive systems used on sport and off-road motorcycles.
Application / Recreational ScootersFront and rear sprocket options for compatible recreational scooter models.
Application / CruisersFinal-drive sprockets for compatible low- and mid-speed cruisers.
Application / Road Touring And CommutingConsider maintenance intervals, cleanliness, noise and service life for high-mileage road use.
Application / Racing And Gearing ChangesSelect front and rear tooth counts to tune the final-drive ratio for the application.
Application / Sand, Gravel And Rough TerrainInspect chain and sprocket wear and service the chain more often when riding in abrasive or high-impact conditions.

Motorcycle Sprockets Series

Motorcycle Brand

Check AvailabilityVOGE RR660S — product image

VOGE

VOGE RR660S

For a 525 chain: a 49T rear in 45# steel and a 15T front in 20CrMoTi. That pairing gives a 3.27:1 final-drive ratio.

Tooth Count
Gear-49T / Front-15T
Material
45# / 20CrMoTi
Chain Size
525
Check AvailabilityVOGE FRONT/ REAR MOTORCYCLE 525DS — product image

VOGE

VOGE FRONT/ REAR MOTORCYCLE 525DS

The spec table lists a 43T rear in 45# steel for a 520 chain. Ask for the front sprocket spec if you need both ends.

Tooth Count
Gear-43T
Material
45#
Chain Size
520
Check AvailabilityVOGE 500R(500RR/R/DS/AC) — product image

VOGE

VOGE 500R(500RR/R/DS/AC)

The listing groups the 500RR, 500R, 500DS and 500AC under a 45T rear / 15T front setup for a 520 chain. Match your exact variant before ordering.

Tooth Count
Gear-45T / Front-15T
Material
45# / 20CrMoTi
Chain Size
520
Check AvailabilityVOGE 525-Street — product image

VOGE

VOGE 525-Street

For a 520 chain, pair the listed 46T rear in 45# steel with the 15T front in 20CrMoTi for a 3.07:1 final-drive ratio.

Tooth Count
Gear-46T / Front-15T
Material
45# / 20CrMoTi
Chain Size
520
Check AvailabilityVOGE 500AC — product image

VOGE

VOGE 500AC

For a 520 chain, pair the listed 45T rear in 45# steel with the 15T front in 20CrMoTi for a 3.00:1 final-drive ratio.

Tooth Count
Gear-45T / Front-15T
Material
45# / 20CrMoTi
Chain Size
520
Check AvailabilityVOGE 500DS — product image

VOGE

VOGE 500DS

For a rear-only replacement, the 500DS listing specifies a 45T sprocket in 45# steel for a 520 chain. Confirm the front separately if replacing both.

Tooth Count
Gear-45
Material
45#
Chain Size
520

Customer Cases

Illustrative sourcing scenarios

Tracing 480 Chains After Two Carton Labels Became Unreadable

A Casablanca distributor ordered 428H chains in two lengths and needed to keep the stock separate. When water damaged two outer labels, we matched the inner lot codes and surviving carton marks against the packing list. The warehouse relabelled both cartons and confirmed the full count.

Country / Region
Morocco
Product Type
428H non-sealed motorcycle chains, 120L and 124L
Project Date
2025
Order Quantity
480 chains (240 per length)
Customer Feedback
We could put both cartons back into stock without ordering replacements. The outer labels were unreadable, but the lot codes on the inner boxes let us tell the 120L and 124L cartons apart. Once we relabelled them, we had the full 240 chains of each length.
Request A Quote

Related Articles

Didn’t find what you wanted to read? Explore More Product Articles

Request A Quote

Our Factory

Motomax Racing is a trusted motorcycle chain manufacturer and exporter based in China, with over 30 years of experience in delivering high-performance drive solutions for riders worldwide.

Our product lineup includes a full range of motorcycle drive chains and sprockets—designed for street bikes, off-road motorcycles, touring bikes, racing applications, and more.

With the advanced production lines and quality control system of the listed parent company SFR, Motomax chains are built with strength, precision and long-lasting performance at their core. We also provide OEM and custom chain solutions to meet your riding needs.

View Our Factory
Factory location
No. 271, Shuyun Road, Cangqian Street, Yuhang District, Hangzhou City, Zhejiang Province, People's Republic of China
Site area
120,000 m²
Team size
>900
Factory Exterior — factory gallery photo

Factory Exterior

01 / 05
Request A Quote

Certificates And Patents

Motomax Certificates And Patents — certificate document
Motomax Certificates And Patents

Frequently Asked Questions

What fitment data should we verify before placing a bulk order for motorcycle sprockets?

Build the fitment list by make, model, model year, market, and variant. Cross-reference the front and rear OEM part numbers, then confirm tooth counts and the full chain size designation. For the front sprocket, verify the countershaft spline profile, offset, and retention features. For the rear, verify the center bore, bolt count, bolt-circle diameter, hole geometry, and offset from the mounting face. Check the assembled chain line and confirm that the chain width matches the sprocket tooth width. Have the supplier flag fitment exceptions in the catalog, and test-fit samples on representative variants before ordering stock across the full model range.

How do we validate a sprocket tooth-count change before stocking a gearing kit?

Calculate the final-drive ratio by dividing rear teeth by front teeth. For example, moving from 15 front and 45 rear teeth to 15 front and 48 rear changes the ratio from 3.00 to 3.20. That raises engine speed by about 6.7% at the same road speed, assuming the same transmission gear and tire rolling circumference. Confirm the required chain length, available axle adjustment, and chain clearance at the guide, guard, and swingarm through suspension travel. If the kit uses a smaller front sprocket, pay particular attention to chain-slider contact. Publish the approved model variants, tooth counts, chain size, and link count together as one kit specification.

When should we specify a steel, aluminum, or hybrid rear sprocket?

Start with steel when replacement intervals and downtime drive the purchase, such as for high-mileage fleets. Consider aluminum when reducing mass matters enough to justify monitoring wear more closely. A hybrid with a steel tooth ring and an aluminum carrier is worth evaluating when both mass and tooth wear matter. Ask for the finished mass at the same tooth count and fitment, the material and treatment specifications, and details of the ring-to-carrier joint on hybrid designs. Compare candidates with the same chain specification, alignment, and maintenance schedule under representative loads and contamination. Use observed wear, replacement labor, and downtime to estimate cost per service interval.

What drawings, samples, and inspection records should we require from a custom sprocket supplier?

Approve a revision-controlled drawing before authorizing production. Define the tooth profile, mounting datums, offset, radial and axial runout limits, and the critical spline or bolt-pattern dimensions. Where tooth hardening is specified, agree on the hardness range, test location, and case depth if applicable. Request first-article measurements from production-intent parts, along with material and heat-treatment records traceable to the sample lot. Verify assembled fit and chain line on the intended shaft or carrier. Before releasing bulk orders, agree on lot identification, the sampling plan for critical features, and advance notification of changes to material, tooling, heat treatment, or production site.

When can a workshop replace one sprocket, and when should it replace the chain and both sprockets?

Inspect the whole drive before approving a single-sprocket replacement. Measure chain elongation using the specified span and method, check for stiff links or damaged seals, and inspect both sprockets for hooked teeth, uneven wear, or damage. Follow the motorcycle and chain manufacturers’ service limits. For example, D.I.D recommends maximum elongation of 1% for its sealed chains and 2% for its non-sealed chains, and recommends replacing the chain and sprockets together when excessive elongation or abnormal noise is present. If one part was damaged early, consider individual replacement only if the applicable service guidance permits it and the remaining parts pass inspection. Check alignment, slack, and clearance before release.

How should we compare bulk sprocket quotes with different MOQs and lead times?

Ask each supplier for pricing by part number, tooth count, and finish, and confirm whether the minimum order quantity applies per SKU or across a mixed order. Normalize quotes to the same delivery point and include freight, duties, inspection, packaging, and any tooling charges. Then compare expected cost per saleable unit after accounting for defects and fitment returns. Use SKU-level demand to estimate how much inventory each minimum order creates and whether the replenishment lead time would leave fast-moving fitments out of stock. Compare the opening order and repeat orders separately, since tooling costs, order mix, and inventory exposure can differ.

Request A Quote

Tell Us What You Need.

Tell us what you have in mind. Share your product interests, quantities and project requirements.

Call us
+86-0571-88620207
Email us
motomax@sfrchain.com
WhatsApp
+86-18857878411
Visit our factory
No. 271, Shuyun Road, Cangqian Street, Yuhang District, Hangzhou City, Zhejiang Province, People's Republic of China
Select Products

* Required fields.

Compare Product Specifications

Different specifications are highlighted.

Request A Product Quote

Contact Our Lighting Team

Customer support is not connected in this demo. Add your WhatsApp business number in the page configuration, or prepare an inquiry below.