How Much Front Fork Travel Do I Need?

A pavement seam may feel like a small bump at steady speed, yet send the fork deeper into its stroke if you cross it while braking. The specified travel stays the same. What changes is where in the stroke the fork sits when the front wheel reaches the seam. To work out how much front fork travel you need, think in both directions. How much room is there for the fork to compress over a rise? How much is left for it to extend as the road drops away?

Where Total Travel Starts and Ends

Total travel on a telescopic fork is the distance it moves along the fork-tube axis from full extension to full compression. The tubes usually sit at an angle. Vertical front-wheel travel describes how far the wheel moves up or down relative to the chassis. The figures can use the same unit while measuring movement in different directions. The exposed length of tube at any one position does not tell you the distance between the two ends of the stroke.

Close-up of a motorcycle’s telescopic fork tubes, lower sliders, and front wheel.

With the rider seated and the motorcycle still stationary, the fork is usually already partway into its stroke. From that loaded position, the distance to full compression is the room it has left to compress. The distance to full extension is the room it has left to extend. All else being equal, if the front end carries more static load and the fork still has room to move, it will generally sit deeper in the stroke. That leaves less room to compress and more room to extend. The total distance stays the same.

One Bump Versus a Series of Bumps

As the front wheel crosses a rise, the suspension lets it move upward relative to the chassis, reducing the impact transmitted to the rest of the motorcycle. Where the surface drops away beyond the crest, the fork needs room to extend so the wheel can follow the road. Bump height alone does not tell you how far the fork will compress. That also depends on how the suspension responds.

A series of bumps adds a question of timing. The closer the bumps are together, or the faster the motorcycle crosses the same stretch, the less time there is between them. If the fork is still deeper in its stroke when it meets the second bump than it was before the first, that is where the next compression begins. Two bumps can be the same height and still leave the fork with less compression travel in reserve for the second one. That is why travel in reserve matters more on a road with repeated large changes in height than on a smooth surface.

Brake Dive and Bottoming Out

Braking increases the load on the front wheel and can cause a conventional telescopic fork to dive. Braking alone can change the fork's position, even on a smooth road. If the front wheel meets a bump while the fork is still deeper in its stroke than it was before braking, there is less room for it to compress. The distance to the end of the stroke depends on where the fork sits when the wheel reaches the bump.

Bottoming out happens when the fork reaches the end of its compression stroke. A single occurrence shows that the fork ran out of compression travel at that moment. By itself, it cannot tell you whether the specified travel is too short. The spring influences both where the fork sits under load and how far it compresses when loaded. Damping influences how it moves through compression and extension. Two forks with identical total travel can use different amounts of it over the same bumps and under the same braking conditions.

There is no single travel figure in millimetres that applies to every motorcycle and road. A smooth route places different demands on the fork from a route with repeated bumps and seams you cross under braking. If the fork bottoms out repeatedly under your usual loads and on familiar roads, it is repeatedly running out of compression travel in those conditions. The amount of travel you need depends on how much of the stroke typical bumps and braking use, and how much extension remains as the front wheel passes over a crest.

Предыдущий: Следующий:

Похожие рекомендации

Расширяйтесь!