Silencer For Pipe

Motorcycle Exhaust Component

A rear-mounted muffler-and-pipe silencing assembly listed for pre-2019 Harley-Davidson bobber and chopper applications.

Review the SFR-branded stainless steel model, compare its inlet with your existing exhaust, and request fit and ordering details from Motomaxsfr.

A Complete Rear Muffler-and-Pipe Assembly

This product combines the muffler and pipe in one rear exhaust assembly. The purchase therefore covers both parts as a matched component rather than a separately listed muffler-only item.

The main body is stainless steel with a chrome-plated silver exterior. Its product listing is aimed at bobber and chopper applications, where the shape and finish of the rear exhaust form part of the motorcycle’s visible layout.

Because the muffler and pipe arrive as one unit, installation depends on both the inlet connection and the space available for the complete rear section.

Motomaxsfr offers the product under the SFR brand. Hangzhou Zhizheng Technology Co., Ltd. is the listed manufacturing entity.

Check the Exhaust Interface Before You Order

The silencer inlet measures 45 mm (1.77 in) inside and 47 mm (1.85 in) outside. If the existing exhaust pipe slides into the silencer, compare that pipe’s outside diameter with the 45 mm inlet opening. If a sleeve or pipe fits over the silencer inlet, compare its inside diameter with the 47 mm outside surface.

This distinction matters because an inner-diameter measurement and an outer-diameter measurement describe different contact surfaces. A nominal pipe size alone does not establish which joint arrangement is present.

Fit note: “Pre-2019 Harley” is the listed application range. Aftermarket exhaust changes can alter the connection and mounting space, so also compare the published 510.5 mm (20.10 in) overall length with the actual rear exhaust layout.

Available Pipe Silencer

SFR chrome-plated stainless steel bobber and chopper exhaust pipe silencer for Harley-Davidson motorcycles

Chrome-plated rear muffler-and-pipe assembly shown in its silver finish.

SFR Adaptable Chrome-Plated Stainless Steel Bobber/Chopper Exhaust Pipe Silencing Accessory for Harley-Davidson Motorcycles

This SFR-branded stainless steel rear exhaust assembly includes a muffler and pipe. It is listed for pre-2019 Harley-Davidson motorcycles in bobber and chopper applications; interface and space still determine installation fit.

  • ApplicationPre-2019 Harley-Davidson motorcycles
  • ТипExhaust pipe silencing accessory
  • Installation positionЗадняя часть
  • Material and finishChrome-plated stainless steel, silver
  • Items includedMuffler and pipe
  • Inlet45 mm (1.77 in) ID; 47 mm (1.85 in) OD
  • Длина510.5 mm (20.10 in) overall; 345 mm (13.58 in) silencing section
  • Вес1.25 kg (2.76 lb)
  • PackingCarton
  • Minimum order2 units
  • Lead time7–15 days
  • ServiceOEM/ODM available

A Dedicated Silencing Section Without a Published dB Rating

The 510.5 mm (20.10 in) assembly includes a dedicated 345 mm (13.58 in) silencing section. This confirms that sound control is built into the complete muffler-and-pipe unit rather than supplied as a separate insert.

The published information does not describe the section’s internal construction or provide a test setup, before-and-after sound levels, or a decibel reduction value. It therefore cannot support a prediction of the installed volume, tone, or reduction on a particular motorcycle.

If an application must meet a measured sound limit, evaluate it with evidence from the relevant engine and exhaust configuration before committing to the order.

Ordering Details for Standard and OEM/ODM Requests

The minimum order is two units, and the listed lead time is 7–15 days. The product is supplied in carton packing.

OEM and ODM service is available for discussion. State the requested change and order quantity so Motomaxsfr can assess the proposed configuration and prepare the applicable quotation.

Request a Pipe Silencer Quote

Send your motorcycle model and year, measured exhaust connection diameter, required quantity, destination, and any OEM/ODM request. Include clear photos of the existing connection and rear mounting area for fit review.

  • Phone: +86-0571-88620207
  • Электронная почта: motomax@sfrchain.com
  • WhatsApp: +86-18857878411
  • Address: No. 271, Shuyun Road, Cangqian Street, Yuhang District, Hangzhou City, Zhejiang Province, People's Republic of China

Email: motomax@sfrchain.com | Phone: +86-0571-88620207 | WhatsApp: +86-18857878411 | Address: No. 271, Shuyun Road, Cangqian Street, Yuhang District, Hangzhou City, Zhejiang Province, People's Republic of China