Motorcycle Drive Chain | Motomaxsfr
Motorcycle Drive Chain
- Featured sizes
- 520 / 525 sealed-chain options
- Link choices
- 120-link / 128-link on 520SX3
- Strength reference
- Up to 40 kN on listed 525SX3 series
- Fit basis
- Motorcycle model, sprockets, link count, and riding load
Motorcycle Drive Chain
Reference from USD 49 / chain; final quote by specification
A motorcycle drive chain is specified by the motorcycle model, sprocket set, link count, and riding load. Sealed and non-sealed constructions differ in lubrication retention and contamination exposure, while the final chain and master-link specification follows a model-specific fit review with Motomaxsfr.
Chain Size, Sprocket Compatibility, and Link Count
The fit review starts with the motorcycle maker, model, year, original chain marking, front and rear sprocket tooth counts, and installed link count. A 520, 525, or 530 chain shares the same nominal pitch family but does not become interchangeable by pitch alone; inner width, roller dimensions, plate profile, sprocket groove, seal clearance, and strength also determine compatibility.
The size code determines compatibility
The OEM chain marking and sprocket set identify pitch, inner width, roller diameter, and side-plate clearance. Those dimensions govern whether a 520, 525, or 530 replacement belongs on the motorcycle.
The link count preserves adjustment range
The original link count provides the starting point, while rear-axle adjustment range, wheelbase, and sprocket teeth determine the final length. A chain that is too short or too long leaves insufficient adjustment or excess slack.
Master links, rivet links, and connecting links belong to the selected chain series. A matched chain-and-sprocket set limits accelerated wear, and a model-specific fit review supports a bulk order.
Sealed and Non-Sealed Chain Tradeoffs
| Decision point | Non-sealed chain | Sealed chain |
|---|---|---|
| Сохранение смазки | Relies on frequent external lubrication and clean running surfaces. | Factory grease is retained around the pin and bushing by the seal structure. |
| Contamination exposure | More open to dust, water, and washout when service intervals are missed. | Seals improve resistance to contamination, but they still need seal-safe cleaning and lubrication. |
| Friction and feel | Can offer low drag in clean, lightly loaded applications. | Seal contact adds a small amount of drag while supporting longer grease retention. |
| Typical use | Short-service, clean environments or applications where simple inspection is the priority. | Street, touring, dirt, dual-sport, and higher-load riding where durability and maintenance intervals matter. |
O-ring, X-ring, and W-ring constructions are distinct seal profiles. The selected series determines the applicable seal, chain size, color, and connecting link.
Strength and Setup Determine Service Life
Ultimate strength is only one part of usable service life. Riding load, shock loading, road contamination, correct slack, wheel alignment, lubrication, and the condition of both sprockets determine how evenly a motorcycle drive chain wears. A higher-strength chain cannot compensate for a misaligned rear wheel, a tight spot, a damaged sprocket tooth, or a seal-damaging solvent.
Seal-safe cleaner and lubricant preserve sealed-chain components, while inspection for stiff links, corrosion, elongation, and tight spots keeps adjustment within the motorcycle maker’s range. A stretched chain or hooked sprocket teeth indicate a matched chain-and-sprocket replacement. A useful quotation includes the motorcycle model, chain size, required link count, seal construction, finish, target riding conditions, and master-link preference.
Chain Size and Seal Options for Riding Duty.
These two user-specified Motomaxsfr offerings cover sealed motorcycle drive chain selection for street, touring, dual-sport, off-road, and higher-load use. Final fit follows the model, sprockets, link count, and master link.
SFR Green 525SX Motorcycle Chain
Exact fit depends on the motorcycle model, chain size, sprocket match, and link count.
- Application / fitStreet, dual-sport, off-road
- Reference range250–900 cc
- МатериалAlloy steel, sealed ring
- Interface standardMatched 520/525 sprockets
Reference from USD 49 / chain; final quote by specification
Motomaxsfr 520SX3 Motorcycle Chain
The 520SX3 details provide a starting point; final fit follows the sprockets, link count, and motorcycle model.
- Application / fitStreet, travel, off-road
- Reference range400–1000 cc (24.4–61.0 cu in)
- МатериалAlloy steel, W seal
- Interface standard520 · 120-link / 128-link
Reference from USD 79 / chain; final quote by specification
Price, Quantity, and Delivery Before Ordering.
Reference pricing is shown for orientation; the final quotation follows the selected size, seal, link count, finish, quantity, and destination.
One chain or connecting-link configuration can be quoted. Sample charge and freight depend on the selected specification and destination.
Unit price follows size, link count, seal construction, color, packaging, and requested quantity.
Negotiated price and capacity follow the confirmed specification, forecast, packaging, and inspection requirements.
The supplied product page states a 20–30 day delivery reference after the specification, commercial terms, and order are confirmed.
EXW, FOB, or CIF options can be quoted. Destination charges and import requirements remain route-specific.
Quotation, commercial invoice, packing list, and available inspection or product documents can be confirmed for the selected configuration.
Have a Chain Drawing or Unusual Duty? Send the Minimum Information First.
Motorcycle Drive Chain Fit Questions.
These answers prepare a fit-ready inquiry.
How do I confirm the right motorcycle drive chain size and length?
A motorcycle make, model, year, original chain marking, front and rear sprocket tooth counts, and current link count are needed. Fit is confirmed against pitch, inner width, roller dimensions, sprocket clearance, and the rear-axle adjustment range.
Should I choose a sealed or non-sealed chain?
Non-sealed chains suit clean, lightly loaded service with frequent external lubrication. O-ring, X-ring, or W-ring chains retain factory grease and resist contamination better for street, touring, dirt, dual-sport, and higher-load riding.
What does the 520SX3 specification cover?
The supplied 520SX3 series page lists 120-link and 128-link options, 38 kN ultimate strength, a 30,000 km (18,641 mi) stated service-life reference, and a 400–1000 cc (24.4–61.0 cu in) reference displacement range. Final fit follows the motorcycle and sprocket set.
What information is needed for a chain quotation?
A quotation requires the motorcycle model, chain size, required link count, seal construction, finish, riding environment, quantity, destination, and master-link preference.
Can the chain be supplied for OEM or custom requirements?
The supplied product page states that OEM service and custom color are available. Branding, finish, packaging, link count, and technical targets determine the available configuration.
Tell Us the Motorcycle, Chain Size, and Quantity.
- +86-0571-88620207
- motomax@sfrchain.com
- +86-18857878411
- No. 271, Shuyun Road, Cangqian Street, Yuhang District, Hangzhou City, Zhejiang Province, People’s Republic of China
Похожие рекомендации
-
Мотоцикл звездочка цепи высокая производительность и прочный
455Premium Mcc 428h Chain For 2-5kw E-Motos. Features 78db Low Noise And High Tensile Strength. Factory Direct From Motomaxsfr.
Посмотреть детали -
Motorcycle Chain Manufacturers
52Source Motomaxsfr Motorcycle Drive Chains In 420, 428, 520, 525, And 530 Sizes, With Sealed Options, Oem Colors, And Fitment Support.
Посмотреть детали -
Sprocket in Motorcycle
53Explore Motorcycle Front And Rear Sprockets For Selected Qjmotor And Benelli Models. Compare 520/525 Chain Sizes And Tooth Counts, Then Request A Fitment Quote.
Посмотреть детали -
Цепь 428h
326Поиск Цепь 428h от Motomaxsfr. Высокопрочные, 78 дБ малошумные и долговечные цепи 428 для оптовиков.
Посмотреть детали
Motomaxsfr